A v6 Nextion display conversion

Barbaros WB2CBA  has modified his stock µBITx v6  kit to use the Nextion 2.8″ TFT LCD display.   He reports that it is working well!  

For firmware, he used KD8CEC Ian Lee’s CEC Firmware Version 1.2 for Ubitx V5 found here:

http://www.hamskey.com/2019/04/release-cec-firmware-v1200-for-ubitx.html

As the v6 design is substantially the same as the v5, the software all works fine with settings for the µBITx v5.

The only glitch with assembling the Nextion 2.8″ screen in the standard case supplied with HF Signals kit is a mechanical issue:  the right two spacers/screws can’t be screwed in.  The two left spacers  supplied with the kit are, however, able to hold the display tightly though.   If needs be, additional holes could be drilled to align with the Nextion mounts.

To help his fellow Ubitx V6 owners who want to use a nextion display in their rig, Barbaros has provided a very helpful MS Word guide: 

UBITX V6 NEXTION TFT DISPLAY MODIFICATION.