Bezels for Nextion Screens

Andy, KG5RKP notes that you can retrieve a bezel pattern for any of the Nextion displays from 3.2 through 7 inches from Itead:

https://www.itead.cc/wiki/Nextion_HMI_Solution#3D_printing_bezel

Andy had a bezel printed by a vendor via 3D Hubs:

https://www.3dhubs.com/

David  Balfour has made bezels  for the 2.8 and 3.2″ Nextion screens by 3D prints.   His rig is shown above.

The larger bezel is on thingiverse if you have a 3d printer. https://www.thingiverse.com/thing:3342327

Reference

Leave a Reply

Your email address will not be published. Required fields are marked *