Replacing relays with Axicom brand relays

 

Jim Sheldon W0EB has now replaced all stock relays in one of his µBITx transceivers with Axicom D2n 12v relays.

All five relays have been replaced with Axicom D2n 12v parts.  Photo courtesy Jim W0EB.

This improved filtering by a wide margin on all bands except 40m.   The results:

80 Meters 3.500 MHz
7.000 (2nd harmonic) – 65.7 dBC
14.000 (3rd harmonic) -76.4 dBC

40 Meters 7.000 MHz
14.000 (2nd) -58.0 dBC
21.000 (3rd) – 47.2 dBC

30 meters 10.000 MHz
20.000 (2nd) -76.9 dBC
30.000 (3rd) -75.8 dBC

20 meters 14.000 MHz
28.000 (2nd) -65.2 dBC
42.000 (3rd) -64.8 dBC

Jim didn’t test 17, 12 and 10 meters, but he suspects their harmonic suppression is in the same boat as the rest.

Closeup of the four Axicom relays in the output stage. Photo courtesy Jim W0EB.
Reference

Graph showing results

The graph above provided by Gary AG5TX shows the resultant effects of using Axicom relays (using Jim’s data points).

Gary says:

“Your shared data maybe useful as you have shown the same board and relay with different measured results. For that particular board and the measurement data you gathered, I would say the results ARE encouraging from this viewpoint:
You have 4.5 dBc more margin to FCC spec on your worst case data point (40m 3rd harmonic) with the supplied data set.”

Reference

 

Sourcing Axicom relays

These relays can be obtained from a number of sources.  If you live in the US they can be found at Arrow, Digikey and Mouser for less than US$3 each.  They are also available from Aliexpress for under US$2 each in a set of 10 and from Component HK in Hong Kong for under US$1 each.

More details on using Axicom relays for RF switching

For those interested in the benefits of Axicom relays see this webpage for a switched Bandpass filter bank:

http://www.i1wqrlinkradio.com/antype/ch97/chiave50.htm

There are wealth of tips on this page for those building switched filter banks.

Conclusion

It appears that the Axicom relays are the answer, and Ashhar Farhan has already committed to replacing these relays in production µBITx, presumably when the current µBITx stocks have been depleted.  Hopefully Raj’s mod for removing spurs will also feature in a v4 board upgrade shortly.

5 Replies to “Replacing relays with Axicom brand relays”

  1. I keep seeing ‘Axicom 12V D2n relays’ but when I go to Mouser, Digikey, etc. there are many parts that fit that spec (current consumption is one variable for example).

    Can someone link to an actual part that they ordered please?

  2. Ditto…
    As of R4 board received in Nov 2018 the build does not contain Axicom products, at least is pictured.

    Repeat request from Kevin… What is the full part number

    TNX

  3. Kevin, Looked and used P/N in picture… should’ve caught that before.

    Full P/N = v231055403a201

  4. Yes – it does appear that the factory is waiting to finalise a v5 board design, rather than make simple fixes to the current production line unfortunately.

    Mike ZL1AXG ubitx.net

Comments are closed.